Measure power in real time and turn devices on and off remotely with this Smart Switch

• Sends a real-time reading of power consumed every 1 second to Enistic Energy Manager
• To fit: cut an existing mains wire and then wire both ends into this unit
• Flexible module for measuring and controlling individual appliances / circuits
• Allows you to see energy consumed by any connected appliance / circuit
• Remotely controllable using Enistic's Energy Manager Online software to allow it to switch on and off

The Smart Switch (Back Box) is an Appliance Level Smart Meter and Control System that is designed to be wired inline into an existing appliance. To fit it, wire the wires of the unit to the equipment you wish to control.  The white wires can be connected to a mains switch for local control, such as a light switch. It is designed to be used as part of an Enistic system and is ideally suited for use within an office environment, where it can be used to send information to the Enistic Energy Manager about energy consumption, allowing you to track how much is consumed every second / minute / day / month / year.

The Smart Switch offers the following features:

• Report of the power being consumed to the nearest 0.1W every 1 second (or slower if so configured) to Enistic's Energy Manager
• Local control - simply press the red button to switch the unit on and off
• Controllable (on and off) via Energy Manager to shut down devices down remotely / automatically
• 13A maximum with surge protection
• Encrypted communications for secure operation
• Mesh networking for excellent range
• Unique serial number embedded in each product for identification on network

Switching & Electrical

• 13A switching with relay operation
• Locally switchable - press the "Program" button to switch on and off
• Surge Protected
• 110 - 240 VAC, 50 - 60 Hz
• Standby power < 1W (typically 800mW)

Fitting

• Connections:
  • On one end of the PCB inside this unit: Live in, Neutral in, Earth in
  • On the other end: Switched live out, Neutral out, Earth out
• The holes in the plastic end cases should be drilled to the correct diameter.  The end pieces are soft plastic and will allow simple modification.
• Cable stress relief connectors are fitted inside the unit.  These need to be placed around the incoming and outgoing cables and tightened.
• This product should be fitted by a qualified electrician.

Power measurement

• Reporting interval: 1 second (min) to 24 hour reporting.
• Typical reporting interval: 10s
• Electrical meter grade power measurement to 0.1W accuracy

Physical

• Size: 90 x 25 x 50 mm - 4 DIN
• Weight: 220g

Communication

• Zigbee communication with security code set for Enistic system integration only
• Maximum number of products per installation: 2 billion
• Mesh enabled with mesh repeating
• Encryption: 128 AES secure encrypted communications
• Auto discovery enabled

Standards

• 2.4 GHz operation. Does not interfere with WiFi networks
• Zigbee closed network operation enabled
• BS5733 (plug)
• CE certified
• LVD certified
• WEE compliant

Manufacture and design

• Designed in the UK
• Manufactured in the UK
• UK, European and Worldwide Patents Pending