Simple, local on/off control for Enistic Smart Sockets.  The Enistic Wall Switch is a simple over-ride switch for the Enistic energy management system. It is a thin design that simply sticks to a wall or cubicle partition.

Specifications

• Takes 1 x AAA battery (not supplied)
• LED indicators (hidden during normal operation) to indicate network activity

Physical

• Operating temperatures: -50 to +75 degrees C
• Dimensions: 80 x 80 x 16 mm
• Weight: 120g
• Indicators
  • Network activity

Technical

• 2.4GHz ISM Band digital direct sequence spread spectrum transceiver.
• Hardware acceleration for IEEE802.15.4 operations.
• Hardware supported encryption (AES-128)
• Can be configured to act as a ZigBee coordinator, router or end device
• Up to 4dBm output power
• Sensitivity up to -98dBm (1% PER)

Certifications

• CE certified
• Zigbee network compliant (closed network mode)
• EMF certified
• WEE certified