The Enistic Smart Energy Controller acts as master interface between Enistic's Energy Manager software and other Enistic products. Simply connect the controller to your internal network, i.e. into a data point, router or hub, and it will act as a bridge between the Enistic system and the Enistic Energy Manager.
Because Enistic is a meshing system, every module talks to every other module in order to maximise range and reliability. This means that in any office or home environment, only one controller is required for full coverage so long as each module is within 30 metres of any other module. If the controller cannot directly pass messages to any module on the network, the other modules in the range will "pass on" the message to ensure trouble-free operation.
The Smart Energy Controller sends information to Enistic Energy Manager via TCP/IP. As such, this controller can be mounted remotely, reporting the information back to a centrally-maintained server if required. This enables use in monitoring many installations using one central copy of the Energy Manager.
Information available from the controller:
Specifications
- Power indicator
- RJ45 ethernet connector
- 5V power supply, 300 mA
Physical
- Operating temperatures: -50 to +75 degrees C
- Dimensions: 90 x 25 x 70 mm
- Weight: 150g
Technical
- 2.4GHz ISM Band digital direct sequence spread spectrum transceiver
- Hardware acceleration for IEEE802.15.4 operations
- Hardware supported encryption (AES-128)
- Can be configured to act as a ZigBee coordinator, router or end device
- Up to 4dBm output power
- Sensitivity up to -98dBm (1% PER)
Software
- DHCP compatible
- UDP debug information generated on UDP port 53005
- UDP commands accepted on UDP port 53004
- Enistic Controller API compatible
Certifications
- CE certified
- Zigbee network compliant (closed network mode)
- LVD certified
- WEE certified
